> Canonical page: https://dieselfuelinjectionrepair.com/guides/injectors/diesel-injector-part-number-by-manufacturer/

> Summary: Practical diesel injector number identification using body markings, OEM catalogs and photographic documentation.

![Illustration of a diesel injection pump and several fuel injectors]({{DCT_THEME_URI}}/assets/images/fuel-injection.webp)

DIESEL FIELD GUIDES / PRACTICAL ADVICE

# Diesel Injector Part Numbers: Where to Find Bosch, Denso, Delphi and OEM IDs

Practical diesel injector number identification using body markings, OEM catalogs and photographic documentation.

1. [Home](/)
2. [Diesel Field Guides for Owners, Fleets, Farms and Repair Shops](/guides/)
3. [Injector families & identification | Diesel Field Guides](/guides/injectors/)
4. Diesel Injector Part Numbers: Where to Find Bosch, Denso, Delphi and OEM IDs

[Field Guides](/guides/) / [Injector families & identification](/guides/injectors/)

The most useful photograph in a diesel injector service inquiry is often the least glamorous: a clear view of its number. Owners search for a part by engine size, vehicle badge or a short code printed on a box, but injectors may change during a production year. Suppliers and OEMs can use separate numbering systems for the same supplied component. A partial number can point to the wrong test specification or incompatible replacement.

## What the symptoms or question actually mean

Look for permanent body engravings, stamped plates or laser markings on accessible surfaces; some markings sit beneath an electrical connector or retaining arrangement and may require qualified removal to view. A Bosch supplier number, Denso number, Delphi identifier and vehicle OEM number may coexist. A casting number, date stamp or batch label is not always the service part identifier.

## What to check and document

Take a sharp photo with the entire component in view and close-ups of all readable identifiers. Include the vehicle or machine make, model, engine family, build year and engine serial number. Note whether the unit was previously replaced. Cross-reference both supplier and OEM catalogs and retain evidence of the revision/suffix. Do not assume two units are interchangeable just because the thread, nozzle seat or electrical connector appears identical.

## How to make the repair or operating decision

After identification, decide what is actually needed: original-unit testing, supported repair, recalibration, approved remanufacturing or a new component. If the number is unreadable, ask the equipment dealer or a specialist to trace it through the engine serial number and an approved parts catalog rather than guessing from an online listing. Note that aftermarket references may include superseded numbers and cross-listings that need verification.

## Prevent avoidable repeat work

Never sand or aggressively clean a precision injector body to reveal markings; preserve the sealing surfaces and electronics. When shipping multiple units, label them individually with cylinder position and associated fault evidence. A strong part identification trail also helps a shop explain its estimate and reduces return shipping caused by an unsupported unit.

## Practical checklist

- Photograph every original marking, including letters and suffixes.
- Capture engine serial number and machine identification.
- Compare OEM and supplier numbers through approved current catalogs.
- Record cylinder location and any injector coding before removal.
- Ask for confirmed service eligibility before shipping the unit.

## Before identifying a replacement or service path

Record the complete part number from the component itself, the engine serial number, application, and the symptom that led to removal. OEM branding alone does not establish interchangeability. Testing, calibration, coding and rebuild support depend on the exact design and approved service procedures.

## Frequently asked question

### Can I use the number on the cardboard box to identify the installed injector?

Use the box number as a lead, not proof. Packaging may have been reused and supplied units may carry revised or remanufactured numbers. Confirm the permanent component marking and engine-specific approved catalog record.

## Reference and further reading

- [Bosch injector technology overview](https://www.bosch-mobility.com/en/solutions/injectors/)
- [PHINIA/Delphi diesel injector family information](https://www.phinia.com/technologies/technologies/fuel-systems---pumps/diesel-fuel-injectors)

## Need to evaluate an actual component?

Practical diesel injector number identification using body markings, OEM catalogs and photographic documentation. If a component requires specialist evaluation, contact DCT before arranging shipment.

[Request a component-service review](/mail-in-service/start-repair/) · [Mail-in process](/mail-in-service/) · [Contact DCT](/contact/)

High-pressure diesel fuel systems require trained personnel. Follow the equipment manufacturer's safety and repair instructions.

## Related guides

- [Bosch CRI, CRIN and CRI3 Diesel Injectors: Identification and Testing](/guides/injectors/bosch-cri-crin-cri3-injector-guide/)
- [Denso G2, G3, G4S and i-ART Injectors Explained](/guides/injectors/denso-g2-g3-g4s-iart-injectors/)
- [Delphi DFI Diesel Injector Families: Identification and Common-Rail Service](/guides/injectors/delphi-dfi-injector-families/)

TALK TO DCT

### Talk to DCT about your component



[Request Service or Quote↗](/contact/)

### Related DCT services

[Fuel injection services ↗](/fuel-injection/)[Mail-in services ↗](/mail-in-service/)[Component drop-off ↗](/component-drop-off/)[Location information ↗](/locations/)

![Gloved hands comparing small metal diesel fuel-system components on a workshop bench](https://dieselfuelinjectionrepair.com/wp-content/themes/dct-twentytwentyfive-child/assets/images/editorial-primary/dct-pg-0292-guides-injectors-diesel-injector-part-number-by-manufacturer-hero.webp)

